COMP offers a complete range of Forced Circulation Evaporators with options of crystallization and additional accessories like elutriation legs, hydrocyclones , post product centrifuge / spray dryer for crystal separation / drying.
Forced Circulation Evaporators are short tube evaporators and are ideally used when the boiling of feed liquid on the heating surfaces is to be avoided due to the salting and fouling characteristics of the liquid. Hence in these evaporators the flow velocity in the tubes is kept very high.
In these evaporators the liquid is circulated at high velocities in the tubes of the heat exchanger while steam is provided in the chest. This liquid is partially evaporated when the pressure is reduced in the vapour-liquid separator to the corresponding boiling temperature. High volume , low head axial flow circulation pumps are used for recirculating the crystal laden slurry in the evaporator and hence the operation of this evaporator is independent of the temperature difference. In the crystallizing operation crystals can be separated from the crystallizing slurry by adjusting the velocity of the circulating stream. These evaporators are ideal for handling liquors with high viscosity or which have a tendency to salt and scale during evaporation.
CRITICAL DESIGN FEATURES -
Link
Forced Circulation Evaporators are short tube evaporators and are ideally used when the boiling of feed liquid on the heating surfaces is to be avoided due to the salting and fouling characteristics of the liquid. Hence in these evaporators the flow velocity in the tubes is kept very high.
In these evaporators the liquid is circulated at high velocities in the tubes of the heat exchanger while steam is provided in the chest. This liquid is partially evaporated when the pressure is reduced in the vapour-liquid separator to the corresponding boiling temperature. High volume , low head axial flow circulation pumps are used for recirculating the crystal laden slurry in the evaporator and hence the operation of this evaporator is independent of the temperature difference. In the crystallizing operation crystals can be separated from the crystallizing slurry by adjusting the velocity of the circulating stream. These evaporators are ideal for handling liquors with high viscosity or which have a tendency to salt and scale during evaporation.
CRITICAL DESIGN FEATURES -
- Optimum tube velocities
- Type of vapour head used with the forced circulation evaporators is chosen to suit the product characteristics.
- Suitable for widest variety of evaporator applications.
- Ideal for crystallizing operation.
- High heat transfer coefficients.
- Positive circulation.
- Freedom from salting, scaling and fouling.
- Suitable for corrosive and viscous solutions.
- Effluent Treatments Plants
- Chemical Industry
- Salt Solutions
Link
